Frequently Asked Questions

Both are 100% natural stone products. Traditional stone veneer is what we refer to as full thickness; cut to be 4″ to 6″ in thickness. The weight of the product requires a supporting ledge or footer for installation. Thin stone is a veneer cut to 1 to 1 1/2? in thickness. At this thickness, no footer is required. You’ll use less material and installation is easier and faster than the full thickness veneer. If you are remodeling (replacing stucco, brick, or siding with stone), then you will most likely need to use thin stone veneer.

R Stone can deliver pieces of our thin stone veneer out to our dealers upon request. If you need to locate a dealer near you to arrange for samples, please contact us to direct you to one of our professional retail partners. Our dealers will help you compare the colors and textures of our thin stone samples based on what you are looking for.

R Stone works with leading authorized dealers throughout the Northeast. When you are ready to order stone, contact us, and we’ll respond to your request in 24 hours and connect you with a dealer in your area that will help you place your order.

Manufactured stone is man-made or fake. It is cast from cement in molds and hand-colored with iron oxide pigments. It is designed to imitate the aesthetic of natural stone. Thin stone is 100% natural, colorfast, and is not affected by salt air. Unlike manufactured stone, it will not fade or discolor with time and is not affected by scratching and chipping of the surface.

Pricing will vary according to quantity and distance to ship. Your local dealer will be a great resource to help you decide on the most appropriate stone and to coordinate shipping to reduce overall transportation costs.

As a general guideline, you’ll want to measure the height and width of the area you intend to cover. Measure the length of any corners from top to bottom. Add 10% for waste. Let your dealer help to ensure you order enough stone for your project.